I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
Very pleased with the quality of the scan. No complaints whatsoever.
Text excerpt from page 72 (click to view)
Cleaning
Cleaning of Video Head
Clean the head with a head cleaning stick or chamois cloth. Procedure 1.Remove the top cabinet. 2.Put on a glove (thin type) to avoid touching the upper and lower drum with your bare hand. 3.Put a few drops of 90% Isopropyl alcohol on the head cleaning stick or on the chamois cloth and, by slightly pressing it against the head tip, turn the upper drum to the right and to the left. Notes: 1.The video head surface is made of very hard material, but since it is very thin, avoid cleaning it vertically. 2.Wait for the cleaned part to dry thoroughly before operating the unit. 3.Do not reuse a stained head cleaning stick or a stained chamois cloth.
Cleaning of Audio Control Head
Clean the head with a cotton swab. Procedure 1.Remove the top cabinet. 2.Dip the cotton swab in 90% isopropyl alcohol and clean the audio control head. Be careful not to damage the upper drum and other tape running parts. Notes: 1.Avoid cleaning the audio control head vertically. 2.Wait for the cleaned part to dry thoroughly before operating the unit or damage may occur.